System Categories
Two systems. One sealed environment.
Wall Systems
Physical separation and containment for active construction environments.
SealCore wall systems create clean, protected work zones inside occupied facilities while minimizing disruption to ongoing operations.
- Modular Containment Walls
- Dust Containment
- Noise Reduction
- Visual Separation
- Fire-Rated Options
- Temporary Hot Aisle Containment
- Custom Space Configuration
Air Systems
Air quality management and contaminant control.
SealCore air systems help control dust, airborne contaminants, and project-related particulates in mission-critical environments.
- HEPA Filtration
- Negative Air Systems
- Air Scrubbers
- Dust Mitigation
- Airborne Particulate Control
- Clean Environment Support
The Sealcore System
Why Sealcore?
STARC, the industry's leading modular containment wall system.
Trusted in data centers, healthcare, and bio/life sciences, rented, installed, and dismantled by Sealcore as a complete service. Telescoping panels lock into an airtight seal in virtually any configuration. You rent a sealed environment, not equipment to manage.
Airtight Dust & Particulate Control
Telescoping panels seal with no gaps. Integrated negative air panels discharge filtered air and keep construction particulate off the floor, with a damper that closes automatically above 165°F.
Negative Air & Pressure Monitoring
Negative air keeps the work zone at lower pressure than the live floor, so air flows in, never out, dust can't drift toward your racks. HEPA then captures 99.97% of particles to 0.3 microns before exhaust. Dedicated negative air and air monitor panels are manometer compatible, with a 2" rated pass through for instrumentation, and Sealcore runs continuous pressure monitoring so the zone stays verifiably isolated.
Class A Fire-Rated, Low-Noise Panels
Every panel is full-assembly tested to ASTM E84 Class A and exceeds ICRA Class V. Sound-attenuating construction reduces renovation noise up to 50%; lift-and-drop assembly is near-silent.
Sound-Attenuating, Class A Rated Surfaces
Sound-attenuating panels; polycarbonate surfaces tested to ASTM E84 / NFPA Class A.
500 lb Impact Resistant
Wall panels are independently impact tested to protect and maintain containment in active environments.
Capabilities
Designed for Datacenters.
Hot-Aisle Containment & Reconfiguration
Seal HAC zones for commissioning and rack changes without downing the hall.
Phased Buildout in Live Halls
Reconfigurable panels advance with each phase so the live side never feels the work.
Custom Configurations
Built to your footprint, corners, offsets, doors, and odd aisle widths configured to the space.